About the Steelcase Think Chair:
The Steelcase 465 Think office chair has been the Steelcase flagship mesh back chair since being introduced. Featuring all current ergonomic adjustments and over-the-top build quality, the Steelcase 465 Think chair is a comfortable, fully adjustable mesh back chair that offers tier-1 build quality.
Our current inventory of black frame Steelcase Think chairs do not have the optional sliding adjustable lumbar pad.
Every Think is fully remanufactured by Crandall Office Furniture, and includes the following:
- New Casters
- New Gas Cylinder
- New Arm Pads
- New Mesh & Fabric (old fabric always removed & pads sterilized)
- 12 Year Warranty
Steelcase Think Chair Features:
From a features standpoint, the Think chair has almost all current ergonomic adjustments and can be adjusted to fit people of almost all shapes and sizes. Spending the time to properly adjust your Think chair will not only make your chair more comfortable for you, it will also help prevent injuries from sitting without the proper ergonomic support.
Listed below are some of the features of the Steelcase V1 Think:
- Seat Height Adjustment
- Seat Depth / Seat Slider Adjustment
- 4D Adjustable Arms
- 4-Setting Variable Stop Tilt Lock
- Breathable Mesh Back (optional)
- Adjustable Lumbar (optional)
Steelcase V1 Think Remanufacturing Process:
Crandall Office Furniture has been the industry leader in remanufacturing office chairs since 2002. Every chair we sell is completely torn down and remanufactured from the ground up in Greenville, Michigan.
We do our absolute best to make sure every chair is as close to new as possible. The only place you may see some variation is in the plastic surfaces – we have no way to resurfacing plastic, so some minor scrapes and dings on plastic pieces are to be expected – we remove anything that has large damage from inventory and use them as parts chairs
We go through all of the working components of every chair, then put it back together with new casters, new gas cylinder, new arm pads, new fabric (always removing the old fabric, chair pads are sterilized with high temperature steam), and we stand behind each of our V1 Think chairs with a 12 year warranty.
With 10,000+ chairs in stock at all times, we’re ready for orders of a single chair, to thousands at a time.
Be careful of terms like “used,” “refurbished,” or “open box” without doing your research – we’ve outlined our process in detail to make sure you know what to expect. We always encourage our buyers to look into the product they are purchasing, and more importantly, the company they are choosing to do business with. Ratings, reviews, and questions are your friend!
All Crandall Office Furniture Remanufactured Steelcase V1 Think Chairs come with the following:
- New Casters
- New Gas Cylinder
- New Arm Pads (made in the USA)
- New Mesh Back
- New Fabric or Vinyl Seat
- Industry-Leading 12 Year Warranty
Lead Times:
- Lead time (5 chairs or less): Quick-Ship in 3 Business Days or Less
- Lead time (6-100 chairs): Made-to-Order in 5-10 Business Days or Less
- Lead time (100-1000 chairs): Made-to-Order in 10-15 Business Days or Less
- Lead times are estimates, and are based on always-in-stock black fabric and soft floor casters
- Please Click Here to Contact Us Directly to Discuss Availability, and Specific Lead Times for orders over 100 Chairs
We’ve include an infographic outlining process below, or you can click here to learn more about our office chair remanufacturing process.
Our Remanufacturing Process Explainer Video:
Remanufactured Steelcase V1 Think Mesh, and Fabric Upholstery Options:
Every chair we remanufacture gets the old fabric removed, chair pads are sterilized with high temperature steam, and new fabric is applied to-order. Below are our standard upholstery options for our Remanufactured Steelcase V1 Think Chairs.
Think 3D Mesh Back:
- 8 Color Choices Always in Stock
- Made in the USA
- Rated at 120,000 Double Rubs (15,000+ is considered heavy duty commercial grade)
Seat Fabric
- 11 Standard Color Choices Always in Stock
- Guilford of Maine – Open House Fabric Line
- Rated at 250,000 Double Rubs (15,000+ is considered heavy duty commercial grade)
- 7 Standard Vinyl Color Choices Always in Stock
- Burch Fabrics – Allante Vinyl Line (6 colors) – Rated at 100,000 Double Rubs
- Burch Fabrics – Vintage Vinyl Line (Vintage – English Toffee Only) – Rated at 50,000 Double Rubs
- Anti-Bacterial / Anti-Microbial / Mildew Resistant / Sulfide Stain Resistant
- 6 Bleach Cleanable Vinyl Color Choices Always in Stock
- Burch Fabrics – Fortress Vinyl Line – Rated at 100,000 Double Rubs
- Bleach Cleanable (90% Water : 10% Bleach Ratio)
- Ink Cleanable / Anti-Bacterial / Anti-Microbial / Sulfide Stain Resistant
Upholstery Color Pictures:
Mesh Back Fabric Options:
Seat Fabric Options:
Remanufactured Steelcase V1 Think Caster Options:
Every chair gets brand new casters included – we offer several different sizes and options to choose from.
65mm Soft Floor (Carpet)
Included
- 65mm (2.5 inch) Diameter
- Great for Low-Pile / Dense Carpets
- Good on Medium Depth Carpets
- Best for people under 200lbs
65mm Hard Floor
+$19
- 65mm (2.5 inch) Diameter
- Great for Hard Surfaces
- Protects Hard Surfaces from Scratches
- Best for people under 200lbs
75mm Soft Floor (Carpet)
+$19
- 75mm (3 inch) Diameter
- Great for Medium / Deep Carpets
- Improved Rolling Smoothness
- Best for people over 200lbs
75mm Hard Floor
+$29
- 75mm (3 inch) Diameter
- Great for Hard Surfaces
- Improved Rolling Smoothness
- Best for people over 200lbs
Roller Blade Style Casters
+$59
- 75mm (3 inch) Diameter
- Soft PVC Tread Great for Hard Surfaces or Carpet
- Best Rolling Smoothness
- Great for people of all sizes
65mm (2.5 inch) vs. 75mm (3 inch) Casters:
65mm (2.5 inch) casters are the standard OEM size caster. Due to their size, they work great on low-pile or dense carpets, and operate best with loads of 200lbs or less. Above that weight you will begin to experience a decline in rolling smoothness.
vs.
The larger 75mm (3 inch) casters are oversized casters. Due to their size, the 75mm caster offers a very fluid rolling experience (especially hard floor 75mm casters on a hard surface). These casters also excel in deep carpets, and uneven or rough surfaces. 75mm casters are also great for larger / big and tall users, as they will roll much more smoothly under stress, and also give you an additional bit of height to your chair.
Roller Blade Casters:
Roller blade style casters are most similar to the hard floor style casters we discussed above, and are the larger 75mm size. Due to their construction, they actually give a bit more height to your chair than our 75mm casters. They have a soft treat that is ideal for harder surfaces, but also rolls well on carpet. These roller blade style casters improve rolling smoothness beyond the twin wheel casters, will help protect your floor, and will significantly decrease rolling noise on hard surfaces. These casters also have the advantage of looking much more modern, and stylish than a standard caster.
Roller Blade Casters are Best For:
- The Smoothest Rolling Experience
- Lowest Amount of Rolling Noise
- Hard Surfaces
- Larger / Heavier Individuals
- Deep Carpet Floors
- Uneven or Rough Surfaces
- Those Needing Extra Height in their Chair (slightly more than 75mm twin-wheel)
- Those Looking for a More Modern Look
Soft Floor (Carpet) vs Hard Floor Casters:
Soft floor casters are constructed of a hard plastic and are designed to work best on carpeted floors. Soft floor casters are the default standard caster that most chairs come with, and are much more common to come across.
vs.
Hard floor casters are constructed of hard plastic, but also have a soft rubber or polyurethane coating on the outside of the wheels. Because the floor itself is hard, a soft coating on the caster provides additional grip (similar to the tread on a tire) and rolling smoothness needed for your chair to roll properly.
This soft coating also doubles as a protective material that helps defend your flooring from dings and scratches. When hard plastic carpet casters are used on hard floors with no protection, it’s not uncommon for there to be wear marks, scratches, and damage to the floor itself.
In addition to protecting your floor, you will also notice a significant decrease in rolling noise on hard surfaces when using hard floor casters.
There is also a safety aspect to this soft coating, as soft floor casters tend to slide a bit unpredictably on hard surfaces, and can easily roll further than expected. This can cause issues when sitting down in, or getting up from your office chair.
Ideal For Flooring Types:
- Wood / Hardwood Floors
- Concrete
- Laminate
- Epoxy
- Tile
- Chair Floor Mats
Remanufactured Steelcase V1 Think Gas Cylinder Options:
Heavy Duty
Included
- Made to match OEM specs
- Standard height chair cylinder
- Seat Height (with 65mm casters)
- ~16.5″ Low
- ~21.5″ High
7″ Stool Cylinder
+$29
- Made to match OEM specs
- Standard height chair cylinder
- Seat Height (with 65mm casters)
- ~23″ Low
- ~30″ High
Stool Kit
+$59
- Made to match OEM specs
- Standard height chair cylinder
- Seat Height (with 65mm casters)
- ~23″ Low
- ~30″ High
- Also Includes 20″ Chrome Foot Ring
Remanufactured Steelcase V1 Think 12 Year Warranty:
All of our remanufactured Steelcase V1 Think chairs are covered by our industry-leading 12 year warranty under normal usage. All working components are warranted for 12 years against manufacturing defects in material and workmanship. In the event of a failure, Crandall Office Furniture will send replacement parts with installation instructions – installation labor costs are not covered. In the event of a failure beyond repair, a replacement chair will be sent. This warranty is good up to the stated manufacturer’s weight limits / capacity, which is 400lbs for the Steelcase V1 Think Chair.
Warranty is null and void if the product is subject to negligence, abuse, misuse, or modification. Warranty only applies to the product; Crandall Office Furniture is not responsible in any way for loss, inconvenience, or any other special damages caused by any defect.
Remanufactured Steelcase V1 Think Return Policy:
We are confident you will love your chair, but if for any reason you don’t, contact us for a no-hassle free return within 30 days of receiving your chair. We’ll send you a return shipping label and refund your entire purchase price once the chair has been received and inspected.
Returned chairs must be in the same condition as received and returned in the original box. (please keep the box until you’re 100% sure you’re keeping the chair).
Custom fabric chairs, or chairs with significant visible wear or damage, will incur a 15% restocking fee.
Shipping & Assembly:
All of our Crandall Office Furniture Remanufactured Steelcase V1 Think chairs ship partially dissembled to keep shipping costs as low as possible. We provide assembly instructions with every chair and have a re-assembly video you can watch here.
Crandall Office Furniture’s shipping hours are Monday – Thursday 8am-3pm EST.
All products ship via UPS Ground from our Greenville, Michigan facility, transit times will vary depending on ship-to location.
You will receive tracking information via email when your order has shipped.
Remanufactured Steelcase V1 Think Assembly Instructional Video:
Remanufactured Steelcase V1 Think Assembly Instructions Document:
Michael (verified owner) –
This chair looks brand new! Clear instructions to assemble, needing to attach only 2 screws. Well packaged.
Gordon T. (verified owner) –
Looks and works like a new expensive chair. Why buy anywhere else? My back and wallet are happy.