Complete Adjustment Guide For The Herman Miller Aeron Remastered Chair

We are excited to continue this series of featuring the variety of adjustments on all of our chairs and today we look at the Herman Miller Aeron Remastered Chair.

Height And Seat Adjustments

 Height Adjustment

Pull height adjustment lever up to move the chair up or down to whichever position fits you best. To have the chair go down lift the lever and make sure you put weight in the chair by either sitting in it or putting weight with your knee to the desired position.

Forward Tilt Adjustment

While sitting in the chair rotate the out knob forwards on the same knob as the Tilt limiter this will let you lean forward in the chair for those that like to work while leaning forward in there desk or workstation,

Back Adjustments

 Lean Back Tension Adjustment

On the right hand side of the chair there is a knob that has a + or – on the face this is the lean back tension adjustment. This can be rotated clockwise to increase the tension when you lean back and counter clockwise to decrease tension when you lean back in the chair.

Variable Stop Tilt Lock (Tilt Limiter)

The Tilt limiter has 3 different positions you have position one which gives you full mobility while leaning back. Number two stops you half way and number 3 is a full stop lock so that you can’t lean back.

Posture Fit Lumbar Adjustment

The chair has a knob on the back of the chair that connects to the posture fit lumbar system. This knob when rotated clockwise increases the pressure on your back and counter clockwise to decrease the pressure on your back. This system does not move up and down the back.

Arm Adjustments

Each arm has its own lever on the back of the arm, lift this lever to change the height of each arm for the best comfortability. These arms are more sturdy than the classic Aeron and has 3 different pivot points right, left and center.

Optional Atlas Headrest Adjustment

This is an optional component that you can purchase on the website. The headrest has three different adjustments, the height, depth and pivot. The height can be adjusted with the lower knob. The depth controls how forward your head is while sitting and the pivot rocks up and down for the best relaxing position.


We hope you found this article and video helpful for adjusting your Aeron Remastered Chair. If you have any questions at all, don’t hesitate to reach out to us via our contact page, chat, or on our Facebook page.

Shop Office Chairs Mentioned in this Article:

Crandall Office Furniture has been remanufacturing Steelcase & Herman Miller office chairs since 2002, and since then has grown to become the largest remanufacturer of high-end office seating in the United States. We see and work on thousands of these chairs every year, which gives us a unique insight into how they stand up to long term use, where they fail, and how to fix them. If you’re looking to learn more about high end seating, you’re in the right place!

Learn More About our Remanufactured & Refurbished Chairs and our process here:https://www.crandalloffice.com/remanufactured-chairs/

Leave a Reply

Your email address will not be published. Required fields are marked *